Mobile Xray C Arm Radiology Equipment Portable Fluoroscopy Machine

High voltage generator

DTXR-50HF

Power: 50KW;

Photograph tube current: 10mA~630mA; continuous fluoroscopy tube current: 0.5mA~6mA; pulse fluoroscopy tube current: 1mA~ 80mA;

Exposure current time product 0.1mAs~ 630mAs;

Photograph tube voltage:40kV~150kV; fluoroscopy tube voltage 40kV~125kV;

can be directly connected to the network cable and remote control for fault judgment and maintenance.

X ray tube

E7884X

Dual focus 0.6mm/1.2mm; power 20 / 50KW; maximum current 700mA; maximum photography voltage 150kV; maximum fluoroscopy voltage 125kV; target angle 12°: permanent filtration 0.9 mm Al / 75KV;

anode heat capacity 210KJ(300khu).

Withstand voltage: 75KV;

Length: 3m.

CZJ

The sliding angle of C-arm along the arc track of arm support is 110°；

The rotation angle of C-arm along the horizontal axis is ± 180°；

The range of C-arm moving up and down along the vertical direction is 350mm;

Sid: 1000mm;

Maximum vertical depth from X-ray center to arc wall of C-arm: 500mm; Minimum distance from X-ray source assembly shell to image receiver: 800mm;

Mobile performance:

• The braking force of the C-arm on the flat cement ground is not less than 200N;
• The starting push (pull) force is not more than 250N while the C-arm is on the flat cement ground.
• Sports protection:Mechanical foot brake.

CareView

560RF

Caesium iodide amorphous silicon panel;

Pixel matrix: 1536x1536pixels;

Imaging area: 236mmx236mm;

Pixel size: 154μm; spatial resolution: 3.3lp/mm; AD conversion 16bits; Maximum frame rate in various photography modes:13fps@1536 × 1536pixels , 30 fps@768 × 768pixels;

Dynamic range: > 80dB;

Imaging time: photography imaging time is not more than 5s, fluoroscopy imaging time is not more than 1s.

Image

acquisition

workstation

PICKE-DRF

DICOM3.0 standard; the reference exposure parameters of each position can be directly called out from the software for doctors to adjust the exposure parameters of the high voltage generator panel for

Reference;

Digital photography function, configurable positive and negative image acquisition;

Digital real-time fluoroscopy function: real-time automatic window width and window level adjustment; real-time edge enhancement: flip and rotate according to different positions; display patient information /

examination information / settings Standby information / image information; real time prompt the number of images that the system can store;real time automatic ROI clipping.

Under the highest pulse fluoroscopy frame rate, fluoroscopy: image stability time is not more than 2s; automatic fluoroscopy function, image

brightness stability is not more than 15%; photography under the maximum field of vision: 75KV, 80mA,5mAs, the number of discernible dynamic wedges is not less than 16;

Under the maximum field of vision fluoroscopy: 50kV, 3mA, discernable dynamic order wedge number is not less than 15; the maximum fluoroscopy image acquisition rate should not be less than 25 frames / s.

Hardware configuration:

CPU: i5-7500 or above; Memory: 4G or above;

Graphics card: GPU NVIDIA Geforce GTX 750ti / p620 (GPU computing power above 5.0)

Hard disk: 1 T;

Motherboard: 1 graphics card slot 1 pci- exi6 / pci-ex4 or gigabit network card;

Operating Display: 1600 * 1200 resolution;

System software: windows7, windows10 (64 bit)

10*10